JNTU

JNTU B.Tech IV BASICS OF POWER PLANT ENGINEERING Previous Question Paper (September - 2022 - R18)

B.Tech | IV | IV-II | R18 | September - 2022

Answer PaperPaper Code: 158DAMaximum Marks: 75Time: 3 Hours

Answer any five questions

All questions carry equal marks

Main

115 marks
a

Explain the concept of super critical boilers.

7 marks

Answer

A supercritical boiler operates at a pressure above the critical pressure of water, which is 221.2 bar. At this point, the distinction between liquid and vapor phases disappears, and the water undergoes a continuous transition into steam without boiling in the traditional sense. This eliminates the need for a steam drum, as the fluid density changes gradually from a liquid-like state to a gas-like state.

Key advantages of supercritical boilers include:

  • Higher thermal efficiency compared to subcritical boilers due to increased operating temperatures and pressures.
  • Reduced fuel consumption and lower carbon dioxide emissions per unit of electricity generated.
  • Faster response to load changes and improved operational flexibility.
  • Lower auxiliary power consumption as there is no requirement for circulation pumps in once-through designs.
b

Describe the hydraulic ash handling system.

8 marks

Answer

The hydraulic ash handling system uses water to transport ash from the furnace to a disposal site. This method is highly effective for large-scale power plants as it is dust-free and capable of handling significant quantities of ash.

The process involves the following components and steps:

  • Ash Collection: Ash from the furnace hopper falls into a water-filled trough or a high-velocity water stream.
  • Transportation: The ash-water mixture, known as slurry, is transported through pipes or open channels (sluiceways) using high-pressure water jets.
  • Disposal: The slurry is directed to a sump or a settling pond. In the sump, centrifugal pumps are used to pump the slurry to a distant disposal area, such as an ash pond or a landfill.
  • Water Recovery: In many modern systems, the water is separated from the ash at the disposal site, clarified, and recirculated back into the system to minimize water consumption.

The primary advantage of this system is the complete suppression of dust, which improves the working environment, though it requires significant water supply and effective wastewater treatment facilities to manage the effluent.

215 marks
a

Write the difference between Rankine cycle and Modified Rankine Cycle.

7 marks

Answer

Sign in to view the complete answer paper.

b

Explain about binary cycles and cogeneration systems.

8 marks

Answer

Sign in to view the complete answer paper.

315 marks
a

Mention the advantages and disadvantages of a diesel power plant over a gas turbine power plant.

7 marks

Answer

Sign in to view the complete answer paper.

b

Give a maintenance schedule for diesel engine power plant.

8 marks

Answer

Sign in to view the complete answer paper.

415 marks
a

With the neat sketch, explain the boiling water reactor power plant?

7 marks

Answer

Sign in to view the complete answer paper.

b

What are the advantages and disadvantages of nuclear power plant?

8 marks

Answer

Sign in to view the complete answer paper.

515 marks
a

Write down the safety measurements for nuclear power plants in detail.

7 marks

Answer

Sign in to view the complete answer paper.

b

Write the difference between BWR and PWR.

8 marks

Answer

Sign in to view the complete answer paper.

615 marks
a

Sketch and discuss FBR and PHWR in detail.

7 marks

Answer

Sign in to view the complete answer paper.

b

Draw the layout and subsystems of nuclear power plant.

8 marks

Answer

Sign in to view the complete answer paper.

715 marks
a

What are the various factors to be considered in selecting the site for a hydroelectric power plant and discuss about primary and secondary investigation.

8 marks

Answer

Sign in to view the complete answer paper.

b

Describe the classification of turbines.

7 marks

Answer

Sign in to view the complete answer paper.

815 marks
a

Describe the Pollution control Technologies in detail.

7 marks

Answer

Sign in to view the complete answer paper.

b

Write the load distribution parameters of Economic and Environmental issues.

8 marks

Answer

Sign in to view the complete answer paper.

About this paper

This page contains the solved question paper with answers of BASICS OF POWER PLANT ENGINEERING from JNTU for B.Tech CE IV IV-II, September - 2022, R18.

For the question paper without answers, switch to the Question Paper tab.

Other papers in BASICS OF POWER PLANT ENGINEERING

Loading Question Papers

Fetching data from database...