JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD

List of Experiments:

1 Study of the morphology of chips produced from different materials sand machining processes. 2 Effect of tool geometry on chip flow direction in simulated orthogonal cutting conditions. 3 Study of cutting ratio/chip thickness ratio in simulated orthogonal cutting with different materials and tool geometry.

• 4. Evaluations of tool face temperature with thermocouple method.
• 5. Roughness of machined surface. Influence of tool geometry and feed rate. 6 Study of the construction and operating parameters of metal spinning Lathe. 7 Study of the water hammer equipment and hydrostatic extrusion setup.
• 8. Extrusion of cylindrical billets through dies of different included angles and exit diameters and their effect on extrusion pressure.
• 9. Practice and study of blanking and punching process and their characteristic features on mechanical press with existing dies.
• 10. Experiments on TIG and MIG welding to find out the mechanical properties of metals hydraulic and Pneumatic circuits
• 11. Study of operation of tool and cutter grinder, twist drill grinder, Centreless grinder
• 12. Determination of cutting forces in turning
• 13. Inspection of parts using tool makers microscope, roughness and form tester
• 14. Studies on PLC programming