JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD
PROCESS CONTROL & INSTRUMENTATION LAB
M.Tech I Year II Semester (R19)
Course Objectives:
To identify and obtain process parameters of various processes in the prototype model.
To understand the working of actuators, converters, controllers and control valves.
To acquire the working knowledge of different controller types, modes of control actions, tuning of controllers and control schemes.
To learn systematic engineering methodologies to solve practical process control problems.
Course Outcomes
After completion of the course the student can:
Do mathematical modeling of different process to analyze its time response.
Apply the control system knowledge to monitor and control industrial parameters like flow, level, pressure, temperature, pH problems.
Identify optimal values for PID controller and realize Electronic, Pneumatic and Hydraulic Control actions for different applications.
Learn to apply software tools typically used by process control professionals. Process Control Laboratory
List of Experiments: (Minimum of 12 experiments should be conducted)
1. Realization of PID control actions and time response analysis with electronic controllers for First and Second Order Systems Using Process Controller Simulator.
2. Effect of ON-OFF, P, PI, PD and PID controller on Liquid Level Process Dynamics.
3. Temperature control process with PID Control Action.
4. Servo and Regulator operation for Set point tracking and Disturbance Rejection for DC Servo Motor.
5. Realization of control actions with Pneumatic and Hydraulic Actuation.
6. Optimum Controller settings with Process reaction curve tuning method.
7. Optimum Controller settings with continuous and damped oscillation tuning method
8. Effect of ON-OFF, P, PI, PD and PID controller on Flow Process Dynamics.
9. Experimental analysis of Control valve characteristics (Different types).
10. Realization of Feed forward control System for Flow-Level Process Station.
11. Multi loop control systems for Flow-Level Process Station using Ratio Control.
12. Multi loop control systems for Flow-Level Process Station using Cascade Control.
13. Mathematical Modeling and Time Response Analysis of Interacting and non-interacting system.
14. Split range control for liquid level process dynamics.
15. Neutralization of waste water using PID controller for pH Control System. Instrumentation Laboratory
List of Experiments: (Minimum 12 experiments to be conducted)
1. Measurement of Load using Strain Gauge bridge
2. Measurement of Temperature using Thermistor, RTD and Thermocouple
3. Measurement of Displacement using LVDT.
4. Pressure measurement through Bourdon Tube
5. Measurement of Flow
6. Measurement of RPM using opto-coupler and comparing it with stroboscope
7. Measurement of precision, Angular Velocity and RPM of a rotating Disk R19 M.TECH EIE
8. Measurement of Velocity, Acceleration and Vibration using Piezo-electric transducer
9. Measurement of Humidity
10. Measurement of Density
11. Measurement of Viscosity of Edible Oil using Redwood Viscometer
12. Measurement of Viscosity of Crude Oil using Saybolt Viscometer
13. Characteristics of pH sensors
14. Radiation Measurement and optical Pyrometers
15. Characteristics of Opto-Electronic Transducers (Photo Transistor, Photo Diode and LDR) R19 M.TECH EIE M.TECH.- I YEAR- II SEMESTER ELECTRONICS AND INSTRUMENTATION ENGINEERING