JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD

Prerequisite

Power Electronic Converters, Power Systems, FACTS

Course Objectives:

• To understand the various power electronic devices simulation used in power systems
• To analyze advanced converter topologies for power system applications

Course Outcomes

After completion of the course, students will be able to.

• Model the different power converters for power system applications.
• Simulate and test the various designs of converter topologies based on needs of power and energy requirements.

List of Experiments:

• 1. Simulation of Thyristor Controlled Series Capacitor (TCSC) (Phasor Model)
• 2. Simulation of Steady-state and transient performance of a simple 6-Pulse HVDC Transmission System (Phasor Model)
• 3. Simulation of Unified Power Flow Controller (UPFC) (Phasor Model)
• 4. Simulation of Static Synchronous Compensator (STATCOM) used for midpoint voltage regulation on a transmission line (Phasor Model)
• 5. Simulation of Distribution STATCOM (D-STATCOM) (Average Model)
• 6. Simulation of Static Synchronous Series Compensator (SSSC) used for power oscillation damping (Phasor Model)
• 7. Simulation of Steady-state and dynamic performance of the static var compensator model SVC (Phasor Model)
• 8. Simulation of Shunt active harmonic filter (Three-Phase Active Harmonic Filter) to minimize the harmonic content propagated to the source from a non-linear load
• 9. Simulation of a typical transformer-less photovoltaic (PV) residential system connected to the electrical utility grid (Grid-Connected PV Array)
• 10. Simulation of Steady-state and transient performance of a 12-pulse, HVDC transmission system (Thyristor-Based HVDC Transmission System (Detailed Model))
• 11. Simulation of Thyristor Controlled Series Capacitor (TCSC) (Detailed Model).
• 12. Simulation of 48-Pulse, GTO-based unified power flow controller UPFC (Detailed Model)
• 13. Simulation of Static Synchronous Compensator using 22 power modules per phase STATCOM (Detailed MMC Model with 22 Power Modules per Phase)
• 14. Simulation of VSC-Based HVDC Transmission System (Detailed Model)
• 15. Simulation of A 48-pulse GTO based STATCOM (Detailed Model)
• 16. Simulation of Distribution STATCOM. D-STATCOM (Detailed Model)
• 17. Simulation of Static Var Compensator (SVC) (Detailed Model)
• 18. Simulation of Transient stability of a two-machine transmission system with Power System Stabilizers (PSS) and Static Var Compensator (SVC) SVC and PSS (Phasor Model).

Note

From the above list, minimum of 10 experiments are to be conducted using any simulation tool

M. Tech – III Semester L T P C 3 0 0 3