JNTU
JNTU B.Tech II ELECTRICAL ENGINEERING Previous Question Paper (March - 2022 - R13)
Answer any five questions
All questions carry equal marks
Main
State and explain Lenz’s law.
Answer
Lenz's law states that the direction of an induced electromotive force (EMF) and the resulting induced current in a closed circuit is always such that it opposes the change in magnetic flux that produced it. This law is a direct consequence of the Law of Conservation of Energy.
Mathematically, it is represented by the negative sign in Faraday's law of electromagnetic induction:
When the magnetic flux through a coil changes, an induced current flows in a direction that creates its own magnetic field to counteract the original change. For example, if the magnetic flux through a loop increases due to an approaching north pole of a magnet, the induced current creates a north pole on the face of the loop facing the magnet, creating a repulsive force that opposes the motion. Conversely, if the flux decreases, the induced current creates a south pole to attract the magnet and oppose its withdrawal.
Obtain an expression for force on a current carrying conductor placed in a magnetic field.
Answer
Consider a straight conductor of length l carrying a current I placed in a uniform magnetic field of flux density B. Let the conductor be inclined at an angle θ with the direction of the magnetic field.
The force F experienced by a charge q moving with velocity v in a magnetic field is given by the Lorentz force equation:
In a conductor, the total charge Q moving through length l in time t is Q = It. The drift velocity v can be expressed as l / t. Substituting these into the force equation:
Simplifying the expression, we obtain the force on the conductor:
The direction of this force is determined by Fleming's Left-Hand Rule, which states that if the thumb, forefinger, and middle finger of the left hand are held mutually perpendicular, with the forefinger pointing in the direction of the magnetic field and the middle finger in the direction of the current, the thumb indicates the direction of the force exerted on the conductor.
With a neat diagram, explain the construction and working principle of a permanent magnet moving coil (PMMC) instrument.
Answer
Sign in to view the complete answer paper.
Explain two watt-meter method of measuring power in three phase system.
Answer
Sign in to view the complete answer paper.
A series RLC circuit has R=80 Ω, L=100 µH, C=0.3 µF. Find the resonant frequency and current at resonance if the supply voltage is 10 V.
Answer
Sign in to view the complete answer paper.
What are the advantages of three-phase system over a single-phase system?
Answer
Sign in to view the complete answer paper.
An inductive coil, having resistance of 10 Ω and inductance of 50 mH, is connected in series with a capacitance of 100 µF across 100V, 50 Hz supply. Calculate the current, the power factor and the voltage drops across the capacitor and the coil respectively.
Answer
Sign in to view the complete answer paper.
Explain about the principle of operation of a DC Motor.
Answer
Sign in to view the complete answer paper.
A 220V, 4-pole, wave connected dc series motor has armature and field resistances of 0.15 Ω and 0.85 Ω respectively. The armature of motor has 60 conductors per pole. The flux developed in the air gap is 20mWb. Find the speed of the motor.
Answer
Sign in to view the complete answer paper.
Derive an expression for the torque of a dc motor.
Answer
Sign in to view the complete answer paper.
A 4-pole, lap wound, d.c machine has total number of 800 armature conductors and produces 0.03 Wb flux per pole when field is excited. If the machine is driven by a prime mover at 1000 rpm, calculate the generated emf across the armature.
Answer
Sign in to view the complete answer paper.
Discuss the principle of operation of 3-Phase induction Motor.
Answer
Sign in to view the complete answer paper.
A 230/400 V single phase transformer has 800 turns on primary. The maximum flux density in the core is 1.5 Wb/m2. Calculate the number of turns on secondary, area of cross section and maximum flux in the core.
Answer
Sign in to view the complete answer paper.
Explain the predetermination of regulation of an alternator by Synchronous Impedance Method.
Answer
Sign in to view the complete answer paper.